How do I start an inspection?

Set up a new inspection

1. Tap Inspect on the tab bar of the home screen. You can either:
   1. Scan a QR code - you should be able to find this in the area you are inspecting
   2. Click Select an Area Manually to chose the area from the list
2. Select an Inspection from the list. You'll only be shown Inspections that can be carried out at the selected Area. If you don't have Inspect Access, you'll still see the Inspection in the list but it will be greyed out.
3. Ensure you've selected the correct Review Type, confirming the checkbox if required:
   1. Self: you're inspecting your own area
   2. Peer: you're inspecting an area that you don't normally
   3. Expert: you're inspecting an area as a subject matter expert
4. Tap Confirm and Inspect to commence the Inspection
   

Resume a draft

1. Tap Drafts on the tab bar of the home screen
2. Tap the Draft you'd like to resume - you can see when this was last updated and when it will expire
3. Tap Continue Inspection

Via Upcoming Inspections

This handy feature on the home screen is only useable once you have set up the Filter by control. This is fully detailed within the My Next Inspections article here.